The NexGen 50L comes standard with vertical glassware and digital temperature/rotation control, while its bath volume allows for rapid heat-up temp. The condenser units have specially designed glass tubes that utilize surface area extremely efficient.
Rotary evaporator features a specially designed motor and belt drive unit, which provides constant rotation at speeds from 10 to 180 rpm with quite operations. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor, making the process more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible with rubber lined rotating flask bucket to maintain temperature throughout.
Standard Glassware Set includes a single 50 liter rotating evaporating flask, two separate 20 liter receiving flasks, and three vertical condensers. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points whilst under vacuum.
· New swivel casters can be adjusted for rotovap to stand securely on uneven floor with leveling feet for further adjustments
· Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
· Specialized motor with extremely compact and robust operating speeds with the new “V” belt drive for quite operations and vibration-free operation.
· Downward-condensing vacuum connection design ensures safe vacuum operation.
· Manual water bath lifting for easy control with stop pin in case of power failure.
· Easy, straight-forward visual operation with digital speed and temperature display.
· One year warranty on rotary evaporator except glassware and all sealing gaskets.
Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.
220V 50/60Hz single phase, 29A, 6400 watts (rotation speed: 400 watts)
High borosilicate glass 3.3
Capacity: 13.2 gallon (50 liters or 1.8 cu ft)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 110 rpm
Evaporating speed: 2 gallon/hour (water), 4 gallon/hour (alcohol)
5.28 gallon (20 liters or 0.7 cu ft)
Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid connection: 3/8″ hose barb
5 to 90°F
Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 22.1″ diameter x 12.2″ height
Material: stainless steel
Media: distilled water recommended
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: Two
Drain port: one
Maximum lifting distance: 9 inches
Ultimate vacuum level: < 3 torrs
Sealing: PTFE + Viton gaskets
Connection: 3/8″ hose barb x 1
Over-temp shut-off, built-in circuit protection
Rough Unit dimensions
52w x 30d x 92h” (fully assembled)
46w x 28d x 58h” (Evaporator), 41 x 34 x 32″ (glassware)
Currently this unit is not UL rated and only holds a CE certification for explosion proof ratings with hermetically sealed components.