Description

Specifications

 

?Electrical requirements
?220V 50/60Hz single phase, 20A,?4300 watt (rotation motor: 300 watts)
?Glass material ?High borosilicate glass 3.3
?Evaporating flask ?Capacity: 5.28 gallon (20 liters or 0.7 cu ft)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 130 rpm
Evaporating speed:?1 gallon/hour (water), 2 gallon/hour (alcohol)
?Receiving flask
?2.64 gallon (10 liters or 0.35 cu ft)
?Condenser ?Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid conneciton: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 9,480 cm2 or 10.2 sq ft
Auxiliary condenser: 3,580 cm2 or 3.9 sq ft
?Working environment ?5 to 95?F
?Water bath ?Temperature range: ambient to 99?C (210?F)
Temperature controller: digital
Dimensions: 17.5″ diameter x 9.8″ depth x 12″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: two
Drain port: one
Exterior liner: rubber
Lifting: motorized
Maximum lifting distance: 7.5 inches
?Vacuum ?Level: < 3 torrs
Sealing: PTFE + Viton gaskets
Connector: 3/8″ hose barb x 1
?Swivel casters ?Four, built-in with locks
?Safety ?Dry-run, over-temp shut-off, built-in circuit breakers
?Shipping weight ?238 Lb (evaporator), 130 Lb (glassware)
?Unit/shipping dimensions ?49 x 23.5 x 82.5″ /?41 x 24 x 48″ (evaporator), 34 x 29 x 33″ (glassware) (WxDxH)
? ?PolyScience 220V 6860 -10?C 13L 1.5HP recirculating chiller with turbine pump
?Welch 220V 2052 2.3 cfm 4-head chemical-resistant diaphragm pump
?Download ?Ai rotary evaporator brochure

SE53ps Standard Package

 

?Part description ?Quantity
Part image
?PolyScience 220V 6860 -10?C 13L 1.5HP recirculating chiller with turbine pump 1 set
?Welch 220V 2052 2.3 cfm 1.5 torr 4-head diaphragm pump and vacuum hose 1 set ?
?Ai 220V SolventVap 5.3-gallon rotary evaporator and water bath 1 set
?Vertical main, auxiliary condensers & 3-way flask 3 pcs ???????????
?5.3G/20L/0.7 cu ft round shaped rotating evaporating flask, glass 1 pc
?10L round shaped receiving flask & vacuum valves 3 pcs ????????
?Reinforced food grade vacuum & chilling tubing 15 ft
?Glass vapor duct with seal (pre-installed) 1 set
?PTFE vacuum sealing kit (pre-installed) 2 pcs
?Glass material feeding port with PTFE open/close valve and PTFE extension feeding tube 1 set ?
?Stainless steel pole & mechanical vacuum gauge 2 pcs
?Flask/condenser support x 2, bracket x 1 3 pcs
?QuickClamp and PTFE centering rings 6 sets
?GL18 connector 5 sets
?Evaporating flask cap spanner, allen key & screws 1 set ??
?NEMA L6-30 30A 250V power plug ?Installed on rotovap
?Ai 20L stainless steel flask carrier / stand 1 pc
?Ai plexiglass bath cover for 20L SolventVap? 1 pc
?User’s manual 2 pcs