Description

Specifications

 

 Electrical requirements  110V 50/60Hz single phase, 2300 watts (rotation motor: 300 watts)
 Glass material  High borosilicate glass 3.3
 Evaporating flask  Capacity: 1.32 gallon (5 liters)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 2″ diameter
Rotation speed: 10 to 140 rpm
Evaporating speed: 0.5 gallon/hour (water), 1 gallon/hour (alcohol)
 Receiving flask
 0.79 gallon (3 liter)
 Condenser  Glassware: Dual-circulating coils, vertical
Chilling fluid connection: 3/8″ hose barb x 2
Condensing surface: 2,780 cm2 or 3 sq ft
 Working environment  5 to 95°F
 Water bath  Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 11.4″ diameter x 6.7″ depth x 9″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: one
Drain port: one
Exterior liner: rubber
Lifting: motoriezed
Maximum lifting distance: 4 inches
 Vacuum  Level: < 3 torr
Sealing: PTFE + Viton gaskets
Connector: 3/8″ hose barb x 1
 Safety  Dry-run, over-temp shut-off, built-in circuit breakers
 5L SolventVap  Shipping weight: 105 Lb (evaporator), 57 Lb (glassware)
Unit/shipping size: 30 x 15.7 x 42″ / 29 x 17 x 35″ (evaporator), 22 x 22 x 22″ (glassware) (WxDxH)
 Click here for specs for PolyScience 110V AD -40°C to 200°C 15L compact recirculating chiller
 110V ULVAC 1.6 cfm 7.5 torr 2-stage PTFE diaphragm pump & fitting
 Download  Ai rotary evaporator brochure

SE13ps Standard Package

 

 Part description  Quantity
Part image
 PolyScience 110V AD -40°C to 200°C 15L compact recirculating chiller 1 set
 ULVAC 110V 1.6 cfm 7.5 torr 2-stage PTFE diaphragm pump & fitting 1 set
 Ai 110V SolventVap 1.3-gallon rotary evaporator and water bath 1 set
 Vertical condenser with 2 chilling water ports and 1 vacuum port, glass 1 pc
 1.32G/5L round shaped rotating evaporating flask, glass 1 pc
 3L round shaped receiving flask 1 pc
 Three-way tee vapor buffering flask, glass 1 pc
 Glass receiving flask & condenser connector elbow with PTFE open/close switch 1 set
 Receiving flask glass vacuum port with PTFE open/close valve 1 set
 Glass material feeding port with PTFE open/close valve & PTFE extension tube 1 set  

 Glass vapor duct with seal (pre-installed) 1 pc
 PTFE vacuum sealing kit (pre-installed) 2 pcs
 Stainless steel pole and mechanical vacuum gauge 2 pcs
 Silicone vacuum tubing 10 ft
 Rubber-wrapped condenser and receiving flask support and bracket 3 pcs
 Flask quick clamp (4 smaller pcs for condenser, receiving flask and feeder, 1 larger pc for 3-way flask) 5 sets
 PTFE centering ring for sealing flanges  5 pcs
 GL14 connector 3 pcs
 Allen key and backup inner hex screws 4 pcs
 User’s manual 1 pc