?Electrical requirements ?110V 50/60Hz single phase, 2300 watts (rotation motor: 300 watts)
?Glass material ?High borosilicate glass 3.3
?Evaporating flask ?Capacity: 1.32 gallon (5 liters)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 2″ diameter
Rotation speed: 10 to 140 rpm
Evaporating speed:?0.5 gallon/hour (water), 1 gallon/hour (alcohol)
?Receiving flask
?0.79 gallon (3 liter)
?Condenser ?Glassware: Dual-circulating coils, vertical
Chilling fluid connection: 3/8″ hose barb x 2
Condensing surface: 2,780 cm2?or 3 sq ft
?Working environment ?5 to 95?F
?Water bath ?Temperature range: ambient to 99?C (210?F)
Temperature controller: digital
Dimensions: 11.4″ diameter x 6.7″ depth x 9″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: one
Drain port: one
Exterior liner: rubber
Lifting: motoriezed
Maximum lifting distance: 4 inches
?Vacuum ?Level: < 3 torr
Sealing: PTFE +?Viton?gaskets
Connector:?3/8″ hose barb x 1
?Safety ?Dry-run, over-temp shut-off, built-in circuit breakers
?5L SolventVap ?Shipping weight: 105 Lb (evaporator), 57 Lb (glassware)
Unit/shipping size: 30 x 15.7 x 42″ / 29 x 17 x 35″ (evaporator), 22 x 22 x 22″ (glassware) (WxDxH)
?Click here for specs for?PolyScience 110V AD -40?C to 200?C 15L compact recirculating chiller
?110V Vacuubrand 0.9 cfm 1.5 torr 4-head 3-stage PTFE diaphragm pump & fitting
?Download ?Ai rotary evaporator brochure

SE13ps-vb Standard Package


?Part description ?Quantity
Part image
?PolyScience 110V AD -40?C to 200?C 15L compact recirculating chiller 1 set
?Vacuubrand MD 1C 110V 0.9 cfm 1.5 torr 3-stage diaphragm pump 1 set
?Ai 110V SolventVap 1.3-gallon rotary evaporator and water bath 1 set
?Vertical condenser with 2 chilling water ports and 1 vacuum port, glass 1 pc
?1.32G/5L round shaped rotating evaporating flask, glass 1 pc
?3L round shaped receiving flask 1 pc
?Three-way tee vapor buffering flask, glass 1 pc
?Glass receiving flask & condenser connector elbow with PTFE open/close switch 1 set
?Receiving flask glass vacuum port with PTFE open/close valve 1 set
?Glass material feeding port with PTFE open/close valve & PTFE extension tube 1 set ?

?Glass vapor duct with seal (pre-installed) 1 pc
?PTFE vacuum sealing kit (pre-installed) 2 pcs
?Stainless steel pole and mechanical vacuum gauge 2 pcs
?Silicone vacuum tubing 10 ft
?Rubber-wrapped condenser and receiving flask support and bracket 3 pcs
?QuickClamp (4 smaller pcs for condenser, receiving flask and feeder, 1 larger pc for 3-way flask) and PTFE centering ring 5 sets
?GL14 connector 3 pcs
?Allen key and backup inner hex screws 4 pcs
?User’s manual 1 pc