Description

Specifications

 

 Electrical requirements  220V 50/60Hz single phase, 20A, 4300 watt (rotation motor: 300 watts)
 Glass material  High borosilicate glass 3.3
 Evaporating flask  Capacity: 5.28 gallon (20 liters or 0.7 cu ft)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 130 rpm
Evaporating speed: 1 gallon/hour (water), 2 gallon/hour (alcohol)
 Receiving flask  2.64 gallon (10 liters or 0.35 cu ft)
 Condenser  Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid conneciton: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 9,480 cm2 or 10.2 sq ft
Auxiliary condenser: 3,580 cm2 or 3.9 sq ft
 Working environment  5 to 95°F
 Water bath  Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 17.5″ diameter x 9.8″ depth x 12″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: two
Drain port: one
Exterior liner: rubber
Lifting: motorized
Maximum lifting distance: 7.5 inches
 Vacuum  Vacuum level: < 3 torrs
Vacuum sealing: PTFE + Viton gaskets
Vacuum connection: 3/8″ hose barb x 1
 Swivel casters  Four, built-in with locks
 Safety  Dry-run, over-temp shut-off, built-in circuit breakers
 Weight and dimensions  Shipping: 238 Lb (evaporator), 130 Lb (glassware)
Unit: 49 x 23.5 x 82.5″ (WxDxH)
Shipping: 41 x 24 x 48″ (evaporator), 34 x 29 x 33″ (glassware) (WxDxH)
 Download  Product brochure
 Compliance  UL 61010-1: 2012 Ed.3 + R: 29 Apr 2016
CSA C22.2# 61010-1-12: 2012 Ed.3+ U1; U2 (R2017)

Standard package

 Part description  Quantity
Part image
 Ai SolventVap 5.3-gallon rotary evaporator and water bath 1 set
 Vapor filtering bottle 1 pc
 Vertical main and auxiliary condensers, glass 2 pcs      
 20L round shaped rotating evaporating flask, glass 1 pc
 10L round shaped receiving flask 1 pc
 Three-way tee vapor buffering flask, glass 1 pc
 Glass vapor duct with seal (pre-installed) 1 set
 PTFE vacuum sealing kit (pre-installed) 2 pcs
 Receiving flask glass vacuum port with PTFE open/close valve 2 sets
 Glass material feeding port with PTFE open/close valve and PTFE extension feeding tube 1 set  
 Stainless steel pole and mechanical vacuum gauge 2 pcs
 Flask/condenser support x 2, bracket x 1 3 pcs
 Flask quick clamp & PTFE centering rings 6 sets
 GL18 connector 5 sets
 Evaporating flask cap spanner, allen key & screws 1 set   
 NEMA L6-30 30A 250V power plug Installed
 Ai 20L stainless steel flask carrier / stand 1 pc
 Ai plexiglass bath cover for SolventVap 20L 1 pc  
 User’s manual 1 pc